Co Line Group Queuing - Vodavi STARPLUS Triad 1 System Programming Manual

2-88

CO Line Group Queuing

Programming Steps
1. Press FLASH and dial [39]. The following message displays:
2. Press button 1-24 to select the desired CO Group to be programmed.
3. Dial a 0 or 1 to enable/disable this feature.
4. Press HOLD to save the entry. A confirmation tone is heard.
Description
The CO Line Group Queuing feature allows trunk group queuing to be
turned on (enabled) or turned off (disabled) per group.
CO L INE G R OU P QU EU IN G
EN TE R B U TTON N UM BE R
The following message displays:
G ROU P 1
EN AB LE D
[0] = Disabled
[1] = Enabled
CO Line Group Queuing
0- 1