Voice Mail Programming
Description
An Alternate Voice Mail Group may be programmed so that if all voice
mail ports are in use, the call can be routed to an alternate group. This is
useful when more than eight ports are required for voice mail traffic.
Leave Mail Index Entry
Programming Steps
1. Press the LEAVE flexible button (FLASH 65, Button #10).
2. Enter a valid Leave Mail Index number on the dial pad:
3. Press HOLD to save the entry. A confirmation tone is heard and the
Deleting a Leave Mail Index Entry
1. Press [#] in the desired location on the keypad.
2. Then press the HOLD button.
Description
The Leave Mail Index specifies the outpulsing Table where the in-band
digits required to connect a caller, forwarded into voice mail, to the called
stations mail box are stored. By default, Voice Mail Group 1 (440) Leave
Mail Index is set to zero (0).
First Digit = Standard Leave Table number (0-7).
Second Digit = Leave Table to utilize when station is forwarded to
VM in a No-Answer condition.
Third Digit = Leave Table to utilize when station is forwarded to
VM in a Busy condition.
V M 4 4G A AA
XXX, XXX, XXX, XXX, XXX, XXX
display updates.
Example -- Tables 1,2,3 entered, to delete only Table 2, enter [1],[#],[3]
and press HOLD).
LLL
R XXX, XXX,
8-5