Table of Contents
Advertisement
9-10
Allow Table
Programming Steps
1. Press the ALLOW TABLE A or ALLOW TABLE B flexible button
2. Enter a valid bin number (01–20) of the bin to be programmed.
3. Enter the Allow Code.
4. Press the HOLD button to save the entry. A confirmation tone is heard
5. When all entries for one table are complete, press the flexible button
Erasing a Bin Number
1. Enter a valid bin number.
2. Press the HOLD button.
(FLASH 70, Button #1 or #3). The following message is shown on
the display telephone:
ALLOW TAB LE
01 E
The first two bin locations display.
It is recommended that:
Bin 17 be reserved for an entry that references SPECIAL TABLE 1
Bin 18 be reserved for an entry that references SPECIAL TABLE 2
Bin 19 be reserved for an entry that references SPECIAL TABLE 3
Bin 20 be reserved for an entry that references the Home Area
Code Table, SPECIAL TABLE 4.
[0–9], [ ], [#] = Corresponding allow digits (numbers)
MUTE = Do Not Care digit (D)
TRANS = Search Special Table (S)
and the display now updates.
for the next table.
A
Toll Restriction
02E
Advertisement
Table of Contents
