Table of Contents
Advertisement
Cabinet/Card Programming
Cabinet/Card Programming
Card Types
Buttons 1 through 12 indicate peripheral card slots 0 through 11. When
Cabinet/Card Programming is initially entered, Flex Button #1 LED is lit.
This indicates that the user is programming the card in peripheral card
slot 0.
Programming Steps
1. Press FLASH and dial [24]. The following message displays on the
2. Press button that corresponds to desired cabinet (CAB). Button 17 for
3. Press the button corresponding to the desired CAB/SLOT location.
4. Enter a valid number for the type of card plugged into the current
5. Press HOLD to save the entry. A confirmation tone is heard and the
display:
CAB IN ET 0
EN TE R B U TT ON N U MB ER
Triad 1/2
or button 17-20 for
CAB
X SLOT
D TIB
(Buttons 1-12 indicate peripheral card slots 0-11.)
peripheral card slot.
[0] = DELETE CARD
[1] = ETIB
[2] = DTIB
[3] = DTIBE (DT24)
[4] = SLIB
[5] = LCOB
[6] = GCOB
display updates.
Triad
3. The following message displays:
XX
0 0-1 1
[7] = DIDB
[8] = PRIB
[9] = T1IB
[10] = BRIB
[11] = BR16
[12] = VOIP
2-81
Advertisement
Table of Contents
