Table of Contents
Advertisement
2-70
Conditions
Access Codes
Programming Steps
If the system is in the programming mode, continue using program
codes. If starting to program here, enter the programming mode.
Only 4-digit extensions will work with Network Tables.
The numbers entered in the station range cannot conflict with the Flexible
Numbering Plan.
When systems are tied together, each system has to have access to 911
through local lines.
With Flexible Numbering enabled/used, the call forwarding feature
changes.
Feature access codes cannot conflict with station numbering.
CO line numbers are fixed and cannot be changed other than the
current FLASH 42 re-assignment.
The VMID digits need to be programmed separately.
The SMDR will output up to 4-digit numbers in the station field. If less
than 4 digits are selected in the numbering plan, leading spaces will
be added in place of numbers. The 3-4 digit SMDR programming area
is removed from programming in FP3. Call Accounting devices need
to be configured to accept 4 digits.
Press FLASH and dial [20]. The following message displays:
ACCES S COD ES
EN TE R B U TTON N UM BE R
Access Codes
Advertisement
Table of Contents
