Table of Contents
Advertisement
Voice Mail Outpulsing Table
Description
Up to twenty-four (24) extension numbers may be programmed into a
voice mail group. A flexible button may be programmed with a voice
mail group pilot number (440-447). This button then acts as a DSS for that
voice mail group when pressed and also serves as the message waiting
indication for that VM group.
Voice Mail Outpulsing Table
Voice Mail In-Band Signaling
Programming Steps
1. Press FLASH and dial [66]. The following message displays:
2. The TABLE 00 flexible button (Button #1) led is lit. To change tables,
3. Dial one of the following, when required:
4. Enter up to 12 digits, including [ ] and [#], TRANS button = pause.
5. Press HOLD to save the entry. A confirmation tone is heard and the
Clearing Entries in a Table
Press the pound key once [#], followed by HOLD.
Description
Entries in one of the eight Voice Mail Outpulsing Tables determine the
In-Band signaling required for:
V OICE
PR E
MAIL Y
SU F
Y = Table I ndex (0–7)
X = Entered Digits (0–9, #,
press the appropriate flexible button (Buttons 2–8) and perform the
following procedures.
[0] = If a prefix is required
[1] = If a suffix is required
[#] = If entry is to be deleted
display updates.
Retrieving messages (allows stations to pick up mail).
Leaving messages (allows stations to leave messages in voice mail).
XXXXXXXXXXXXE
XXXXXXXXXXXXE
, Pauses)
8-7
Advertisement
Table of Contents
