Table of Contents
Advertisement
9-6
Special Reference Tables
The
referenced from within the two Allow Tables.
Related Items To Toll Restriction
CO/PBX Lines
When CO lines are marked as PBX lines the system first checks the PBX
code table for a valid match. If the first digits dialed do not match the
entries in the PBX code table the call is considered an attempt to call
another PBX extension and no toll restriction is applied. If the first digits
dialed are found in the PBX code table (FLASH 12), toll restriction starts
with the next dialed digit.
Forced Account Codes
The system can be programmed to force the use of account codes on all
restricted calls. When forced account codes are enabled an account code
must be entered to place a call that is otherwise restricted through toll
restriction. By entering an account code, the station class of service
becomes unrestricted. When account codes are forced on a system wide
basis selected users may be instructed on how to enter account codes
from any station and be allowed to dial unrestricted from a station that
may otherwise be restricted. Use of account codes in this manner, as a
traveling class of service, is however, not controlled by the system. Any
station user with knowledge of how to enter account codes to override a
stations toll restriction can do so.
Triad 1/2/3
System also offers four special tables that can be
Three of the special tables can be assigned to specific area codes that
require further toll restriction definition.
The fourth Special Table is reserved for use as a home area code table
(numbers within the same area code as the site where the system is
installed). This provides expanded ability to apply toll restriction on
numbers that are dialed within an area code.
Each Special Table allows up to 800 entries (200–999). This offers the
ability to allow every office code on an individual basis.
Related Items To Toll Restriction
Advertisement
Table of Contents
