Table of Contents
Advertisement
10-10
Exception Code Table
Programming Steps
1. Press EXCEPTION TABLES flexible button (FLASH 75, Button #3). The
2. Press the HOLD button to save the entry. A confirmation tone is heard
3. Press FLASH 75, Button #3 again for further entries. Up to 20
Description
The Exception Code Table is used for operator calls and any other calls
that use a one- or two-digit entry, rather than a three-digit area code.
Route List Table
Programming Steps
1. Press the ROUTE LIST TABLE flexible button (FLASH 75, Button #4).
following message displays:
EXCEP TION COD E TA B LE
EN TE R
XX
= [0] to remove code from table, [1] to add code to table
XX = Exception codes for singl e digit codes, press MUTE button as 2nd digit.
(The [ ] may be entered as the 1st digit only.)
RR = Route Table Number 00–15
and the display updates.
Exception Codes may be programmed in this table.
The following message displays:
R OUT E LIST TAB LE
R R T
GG D D
RR = Route List Table Number 00–15
T = Time Pe riod Route List 1–4
GG = CO Line Group 00–23
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
RR
HOL D
L
LCR Operation
Advertisement
Table of Contents
