Table of Contents
Advertisement
4-34
Assigning a Pool Group Button
Enter: [BB], [3], [GG], [HOLD]
Some or all outside CO lines may be grouped together and accessed via a
POOL button for the purpose of placing an outgoing CO call. Pressing
this button accesses the highest numbered unused CO line in that CO
line group.
Assigning a Feature Button (admin programmable)
Enter: [BB], [4], [XXX], [HOLD]
This feature enables flexible buttons to be programmed from a remote
location. Range programming can be used to assign these buttons to
multiple stations. When a button is assigned as a feature button [4], the
programmer can program any features on the buttons.
Unassigning (lock out) a Button
Enter: [BB], [#], [HOLD]
If SLT stations must be programmed for off-hook preference, program
the desired CO line, or CO line group the SLT must access when going
off-hook.
Assigning a CO Line for an SLT (with off-hook preference)
Enter: [01], [1], [LLL], [HOLD]
Assigning a CO Line Group for an SLT (with off-hook preference)
Enter: [01], [3], [GG], [HOLD]
GG = Line Group Number (00-23)
2 1
3
B u t to n
Po o l
N u mbe r
Co d e
When upgrading software from FP2 to FP3, which supports this feature,
all previously programmed trunk groups will be lost.
LLL = CO Lines (Tri ad 1/2=001-048, Triad 3=001-144)
GG = Line Group Number (00-23)
0 2
H OLD
Lin e
Gr o u p
Page B Introduction
Advertisement
Table of Contents
