Table of Contents
Advertisement
ICLID Programming
Valid 3-Digit Destinations (XXX)
[020-999] = System Speed Bins 1020–1999,
for Off-Net Ringing
[100-171] =
Triad 1/2
=Triad 3
[100-351]
[440-447] = Voice Mail Groups 1–8
[450-457] = Hunt Groups 1–8
[499] = Direct Ringing to Modem
[550-565] = ACD Groups 1–16
[550-557] = ACD Groups 1–8
Description
ICLID Ringing Assignments let you change the ring assignment based on
the incoming number received. This feature permits you to select from
500 ringing routes for each entry in the name to number translation table
and DID table (Flash 55). For example, this feature could be used to
re-route selected customers to a specific ACD or UCD group and bypass
the general Attendant.
The Direct Inward Dialing (DID) feature permits one-way direct inward
dialing access to stations on specific DID lines from the public telephone
network, without going through an Attendant answering position. DID
capabilities refer to incoming calls only.
The system accepts 3-7 digits from the Central Office. This lets the
number and name field of the LCD display on a DID call be presented to
the ICLID port. Calls are identified in the SMDR field as answered (I) or
Unanswered (U) followed by the DID number. At least one DTMF receiver
must be installed.
Table 3-10: ICLID Ringing Assignments
Extension Numbers
Extension Numbers
All previously programmed routes will be lost when upgrading from FP2
to FP3.
Valid Ring Types (Y)
[0] = No Ring; unassigned; or to delete a
station
[1] = Day Ring [D]
[2] = Night Ring [N]
[3] = Day/Night Ring [DN]
[4] = Special Only [S]
[5] = Day/Special [DS]
[6] = Night/Special [NS]
[7] = All Modes [Day/Night/Special [A]
3-45
Advertisement
Table of Contents
