Networking Tables - Vodavi STARPLUS Triad 1 System Programming Manual

2-68
By default, Port #1 (MPB RS-232C), Port #3 (RS-232) and Port #4 (RS-232)
baud rates are set for 9600.
Port #2 Baud Rate
Programming Steps
Press the PORT #2 flex button (FLASH 15, Button #2) to verify the baud
rate of the On-Board modem. The following message displays:
Description
PORT #2 -- On-Board 2400 Baud is standard on the
optional on
for 2400.

Networking Tables

Programming Steps
1. Press FLASH and dial [16]. The following message displays:
2. Press the desired button, make the necessary entry, and then press
P ORT
2
Triad 1/2. By default, the On-Board modem baud rate is set
N ET WOR K IN G TAB LES
SEL ECT S YS N O
HOLD after each entry to select a trunk group, station range, IP
address (if applicable), and system number:
[1] = Select Trunk Group (0-23)
[2]= Station Range START (100-9999)
[3] = Station Range END (100-9999)
[4] = IP Address
[22] = Page Up
[23] = Page Down
[24] = Select system number (1-16)
Networking Tables
BAUD
240 0
Triad 3 System, but