Table of Contents
Advertisement
LCR Operation
Digits can also be added to a number that has been dialed by the user.
For instance, Other Common Carrier (OCC) access codes and
authorization (ID) codes can be automatically inserted by the system
either in front of, and/or behind the number dialed.
There are twenty Insert/Delete Tables and each allows entries in a delete
table and a pre- and post insert table. Up to 40 digits (including pauses)
can be inserted (20 pre and 20 post) and up to 16 digits can be deleted.
Digits can be inserted before or after the number dialed, but can be
deleted only from the start of the number dialed.
To ensure that a pause is inserted in LCR at default, the database
programming was changed to add a pause in each of the 20 LCR Insert
and Delete Tables and insert table 0 in each of the route tables.
Daily Start Time Table
Programming Steps
1. Press the DAILY START flexible button (FLASH 75, Button #6). The
2. Enter times in military format (2400 hours) in succession.
3. Press the HOLD button to save the entry. A confirmation tone is heard
Description
The Daily Start Time Table correlates the LCR Routing Table to the time
sensitive discount structure offered by the customers carrier.
following message displays:
D AILY
STAR T
H HMM
H H MM H H MM H H MM
and the display updates.
Default times are 0800, 1700, 2300 (8 AM, 5 PM, and 11 PM), and
the fourth time is disabled (####).
To change a Start Time, all times must be re-entered. Four pound
signs [####] are displayed if nothing is entered for a specific time.
TIME
TA B LE
HOL D
10-15
Advertisement
Table of Contents
