Attendant Display - Vodavi STARPLUS Triad 1 System Programming Manual

3-76

Attendant Display

Programming Steps
1. Press the ATENDANT DISPLAY flexible button (FLASH 47,
2. Enter a valid number (0 or 1) on the dial pad.
3. Press the HOLD button to save the entry. A confirmation tone is heard
Description
The Attendant Display option determines whether the first Attendant
station should be notified of any alarm conditions when they occur. By
default, all alarm conditions are enabled to be sent to the first Attendant
station LCD display.
Button #16). Button #16 LED is lit steady. The following message
displays:
D ATA E RR OR S
AT T D ISP LAY E NA B LED
[0] = No alarm
[1] = Alarm enabled
and the display updates.
T-1 Alarm Programming
0- 1