Message Wait / Vm Button; Message Callback - Dss / Blf - Vodavi STARPLUS Triad 1 System Programming Manual

2-48

Message Wait / VM Button

Programming Steps
1. Press the MSG WAIT/VM BTN flex button (FLASH 07, Button #4). The
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Message Wait/VM Button flash rate is the rate at which the Message
Wait and VM button(s) flashes when you receive a message/voice mail
message. This flash rate can be programmed to 29 different options
identified in the flash rate table. This enables the programmer to
customize the key system configuration to desired flash rates. By default,
Message Wait/VM Button flash rate is set for a Red Steady On (01).

Message Callback - DSS / BLF

Programming Steps
1. Press the MSG CBCK – DSS/BLF flex button (FLASH 07, Button #5).
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
following message displays:
MSG WAIT / V M B TN
R ED S TEA DY ON
the 29 available options. (Refer to
display updates.
The fixed message button should not be used as a Voice Mail button.
The following message displays:
MSG CB CK / D SS / B LF
R ED 1 20 IPM FLU T TER
the 29 available options. (Refer to
display updates.
Programmable Flash Rates
0 0-2 8
Table 2-6: Flash Rates.)
0 0-2 8
Table 2-6: Flash Rates.