Table of Contents
Advertisement
Database Printing
Print Entire System Database
Programming Steps
1. Press the ENTIRE SYSTEM flexible button (FLASH 85, Button #8). The
2. To print the entire database, press the HOLD button. The display
3. When the system finishes sending the database to the printer, a
Description
The Print System Database command dumps the entire database as a
permanent record which can serve as a hardcopy of the database. The
system baud rate must match that of the printer or receiving device.
Printing the entire database takes a while to print. The database is
printed in the following order:
1. All System Parameters
2. All CO Line Programming
3. All CO Ports
4. All Station Attributes
5. All Station Ports
6. Exception Tables (Allow/Deny/Special)
7. System Speed Dial Numbers
8. ICLID Ringing Assignment Table
9. Directory Dialing Table
10. Hunt Group Parameters (Bins 020–999)
11. LCR Tables
12. ICLID Parameters and Table(s)
13. ACD * or UCD Group Parameters
14. Voice Mail Group Parameters
15. DID Translation Table
16. DID-TIE Timers
17. Verified Account Codes Table
*This feature is available with optional software.
following message displays:
P RIN T D ATA BA SE
P RE SS H OLD
updates to indicate what portion of the database is printing.
confirmation tone is heard.
12-27
Advertisement
Table of Contents
