Table of Contents
Advertisement
System Timers
Description
The Transfer Recall Timer determines the time a transferred call rings at
the station receiving the transfer before it recalls the station making the
transfer. If unanswered by that station, the call recalls the attendant. By
default, the Transfer Recall Timer is set for 45 seconds and is variable from
000-300 seconds. A 000 entry disables the timer and there is no recall.
Preset Forward Timer
Programming Steps
1. Press the PRESET FORWARD TIMER flex button (FLASH 01,
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Preset Forward Timer determines the time an outside line rings
before being forwarded to a predetermined station. This entry works
with Preset Forward station assignments in Station Programming. More
than one station can be forwarded to the same party.
This timer also governs the time the DISA call rings at a station before
returning to intercom dial tone, if not answered. By default, the Preset
Forward Timer is set at 10 seconds and is variable from 01–99 seconds. If
no preset forward destination is programmed, the feature is disabled.
Button #5). The following message displays:
P RE SET FW D T IMER
10
01-99 seconds.
display updates.
Initial incoming CO lines follow the Preset Call Forward Timer when
encountering a station in the Forward/No Answer mode.
0 0-9 9
2-7
Advertisement
Table of Contents
