Page B Introduction
Music-On-Hold (per CO Line)
Programming Steps
1. Press the MUSIC-ON-HOLD flexible button (FLASH 40, Page B,
2. Enter a valid number on the dial pad to change this feature.
3. Press HOLD to save the entry. A confirmation tone is heard and the
Program
Code
FLASH 09
* Music Channels 3-8 can only be used for Music-On-Hold functions
Description
The Music-On-HOLD feature allows a user to select the Music-On-Hold
channel for each CO line. This feature lets the system assign CO line
circuits as additional music inputs. This increases the capacity of music
channels beyond the two available on the MISU to be used for MOH
sources. A total of eight channels are available for use on the system. The
CO line can be assigned to NOT PLAY music for callers on hold. By default,
Channel 1 is used for Music-On-Hold.
Button #8). The following message displays:
MOH C HA N NE L
1
[0] = No Music-On-Hold
[1] = Channel 1
:
: : : :
[8] = Channel 8
display updates.
Table 3-7: MOH Programming Codes
Flex
Button
1
Music Channel #3*
2
Music Channel #4*
3
Music Channel #5*
4
Music Channel #6*
5
Music Channel #7*
6
Music Channel #8*
0- 8
Feature
(after initialization)
Default
##
##
##
##
##
##
3-27