Table of Contents
Advertisement
1-30
HYPER TERMINAL -- Uploading a Database File
After opening Hyper Terminal, and the New Connection screen displays,
complete the following steps:
1. Type a connection name and select the appropriate icon, then click
2. When the Phone Number screen displays, change the setting in the
3. Once the COM1 Properties screen displays, change the settings as
4. Press <Enter> and complete the following fields:
ENTER PASSWORD:
ADM>,
ADM>86
ADM>Q
ADM>
5. On the tool bar, click <Transfer> and select Send File.
6. Change Protocol setting to XMODEM.
7. Click <Browse> to locate database file; double-click on the filename.
8. Click <Send>. Adm> prompt displays when file transfer is complete.
<OK>.
Connect Using box to: Direct to COM1, and then click <OK>.
shown, and then click <OK>.
Baud Rate = 9600
Parity = None
Data Bits = 8
Stop Bits = 1
Flow Control = Xon/Xoff
Screen Field
Database Upload/Download Routine
Type password: XXXXVODAVI
(XXXX = default password for online administration)
Type program number.
Load database routine.
Type button number.
Upload database.
Press HOLD button.
Press <Enter> key twice.
Action
Advertisement
Table of Contents
