Table of Contents
Advertisement
2-22
DTMF On/Off Time Operation
Programming Steps
1. Press the DTMF TIME OPERATION flex button (FLASH 02, Button #6).
2. Enter a valid number (1-9) on the dial pad for the DTMF On and Off
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The DTMF On/Off Time feature lets the installer select the DTMF On/Off
Time on a system-wide basis. This lets the installer customize the system
for certain applications that require more than the standard DTMF Time
of 100ms on and 100ms off.
By default, the DTMF Time Operation is set for 100 ms On and 100 ms Off.
System Features 1 Programming
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
Description
This section describes the procedures and steps necessary to program
System Features in the System Features programming area. The buttons
on a digital telephone are shown in the following illustration:
The following message displays:
D TMF ON / OF F TIME
1
Times (100-900 ms).
Press FLASH and dial [05]. The following message displays:
SY ST EM FEATU R ES 1
EN TE R B U TTON N UM BE R
System Features 1 Programming
1- 9
Advertisement
Table of Contents
