Table of Contents
Advertisement
UCD Group Programming
UCD Group Programming
Programming Steps
1. Press FLASH and dial [60]. The following message displays:
2. Enter the group number (550-557) on the dial pad.
3. Press HOLD.
Description
There can be eight UCD Groups of no more than eight stations each. The
UCD Groups use a pilot hunting technique. If the pilot number is dialed,
the assigned stations in that UCD Group are searched for the station
which has been in an idle condition for the longest time period.
Each UCD Group may have an assigned Alternate UCD Group, an
Overflow Station, and up to eight stations as UCD members. The two
system RAN ports (tables) may also be referenced on a per UCD Group
basis. By default, UCD Group Tables are empty.
U CD AT TR IB UT ES
SEL ECT A G R OUP
7-3
Advertisement
Table of Contents
