Table of Contents
Advertisement
Page A Introduction
Description
The Executive Override Blocking feature allows or disallows override of
an extension. This prevents a user with override capability from
overriding a station. By default, Executive Override Blocking is disabled at
all stations.
CO Line Ringing Options
Programming Steps
1. Press the RINGING OPTIONS flexible button (FLASH 50, Page A,
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
When a CO call rings at a busy station, the call rings at the station using a
muted ring signal. This option lets a user receive a reminder ring at their
station, instead of a muted ring. In addition, a Reminder Ring Timer has
also been added to the system to provide the reminder ring every time
the timer expires, for as long as the incoming CO line has not been
disconnected. By default, Muted Ringing is allowed at all stations.
The Executive Override Blocking feature also blocks an ACD Supervisor
Monitor with Barge-In.
Button #14). The following message displays:
CO R IN G OP TI ONS
MU TED R ING
[0] = Reminder Ring
[1] = Muted Ring
0- 1
4-13
Advertisement
Table of Contents
