Table of Contents
Advertisement
System Features 2 Programming
Description
The One-Touch Recording Warning Tone feature lets the installer enable/
disable the One-Touch Recording Warning Tone on a system-wide basis.
By default, the Recording Warning Tone is enabled.
Ringback on Transfer
Programming Steps
1. Press the RINGBACK ON TRANSFER flex button (FLASH 06,
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Ringback on Transfer feature provides on a system-wide basis music
on hold or ringback tone to the CO caller when CO calls are transferred.
Callers currently hear music. By default, the Ringback on Transfer feature
is disabled.
Use of this feature when the One-Touch Recording Warn Tone is disabled
may be interpreted as a violation of federal, state, or local laws, and an
invasion of privacy. Check applicable laws in your area before recording
calls using this feature.
Button #11). The following message displays:
R ING B ACK ON XFE R
D ISA BLE D
[0] = Disabled (Music)
[1] = Enabled (Ringback Tone)
0- 1
2-41
Advertisement
Table of Contents
