Power Supply Types ( Triad 3)
Power Supply Types
Programming Steps
1. Press [15] for power supply 0 or [16] for power supply 1. The
2. Enter a valid number to indicate the current amps (0 for 10 amps or
3. Press HOLD to save the entry. A confirmation is heard and the display
Hunt Groups
Hunt Group Programming
Programming Steps
1. Press FLASH and dial [30]. The following message displays:
2. To change Hunt Groups or enter a different Hunt Group, press flexible
3. Enter a valid three-digit station number, or station numbers up to
4. Press HOLD to save the entry. A confirmation tone is heard and the
(Triad
following message displays on the display:
P OWER SU P PLY 00 T Y P E
10 AMP S
1 for 15 amps).
updates.
H UN T 4 50 P LT ON E
## #, ## #, # ##,
The top left button in the flexible button field is lit for programming
Hunt Group 1 (450).
button 1-12 (450-461) and perform the following procedure.
eight stations per group. Hunt groups are joined together by entering
another Hunt Group Pilot Number as the last entry of the group.
display updates.
3)
0- 1
# ## , ### ,
### , ## #, # ##
2-83