Table of Contents
Advertisement
System Features 1 Programming
Description
The system may be programmed to have Exclusive or System Hold.
Refer to
default, Hold Preference is System Hold.
External Night Ring
Programming Steps
1. Press the EXT NIGHT RING flex button (FLASH 05, Button #3).
2. Enter a valid number (0 or 1) that corresponds with the following
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
When External Night Ring is set to yes, it activates External Night Ring
which produces a tone that is sent over all external page groups.
When outside lines are marked UNA, ringing activates a tone over
external paging when an incoming call occurs on those lines during night
service. By default, External Night Ring is disabled.
For Exclusive Hold: Press HOLD once for Exclusive Hold, and twice for
System Hold.
For System Hold: Press HOLD once for System Hold, and twice for
Exclusive Hold.
System Timers
entries:
[0] = Disabled
[1] = Enabled
EXT ER N AL NI GH T R IN G
D ISA BLE D
for System and Exclusive Hold recall times. By
0- 1
2-25
Advertisement
Table of Contents
