9-8
Toll Restriction
Entering Toll Table
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
1. Press FLASH and dial [70]. The following message displays:
2. To program Allow/Deny tables, press the appropriate Table button
3. To program Special Tables 1-3, it is necessary to associate an area
4. To display entries in any of the tables, press the DISPLAY TABLES
Description
All toll tables have been conveniently placed under one program code to
allow entry of all toll restriction data.
EX
TA BL ES
EN TE R B UT TON N U MB ER
and enter information as outlined in the following procedures.
code to the table. This is done by pressing the appropriate AREA
CODE TABLE button and assign the area code.
Special Table 4 is reserved for the home area code and does not
require an area code entry.
button (FLASH 70, Button #12). Entries in the Allow/Deny tables
display two at a time. Entries in the Special tables display six at a time
in ascending order.
Toll Restriction