Table of Contents
Advertisement
LCR Operation
LCR Routing for Toll Information
Programming Steps
1. Press the TOLL INFO flexible button (FLASH 75, Button #8). The
2. Enter a valid Route List number (00–15) for the Route to be
3. Press the HOLD button after programming the Route number. A
4. Enable LCR at this point.
Description
The LCR Routing for Toll Information feature adds provisions to the LCR
call processing which allows common call routing for all toll information
calls. 1-(XXX) 555-1212, (XXX) 555-1212, 1-555-1212, and 555-1212 calls
are intercepted and sent to a selected route in the Route List Table.
Numbers dialed are integrated and if it is determined to be a toll
information call, either preceded with an area code or without or with a
leading digit 1 or not, the call is sent to the route designated in
programming.
By default, Toll Information Calls are sent to Route List Table Zero (0)
which allows toll information calls to be placed on the system at default.
A Toll Information route is chosen over a 3-digit or 6-digit route
assignment if both are assigned. Entering the pound key twice [##]
denies all Toll Information Calls.
following message displays:
LCR R OU TE FOR 55 5 - 1 21 2
EN TE R R OU TE
referenced in the Route List table.
confirmation tone is heard and the display updates.
10-19
Advertisement
Table of Contents
