Table of Contents
Advertisement
3-24
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press the HOLD button to save the entry. A confirmation tone is heard
Description
An option has been added to support T-1 channels which do not supply
dial tone. Some carriers require the system to generate dial tone to its
users, while other carriers do not. (By default, the Dial Tone option is
disabled.)
Transmit Volume
Programming Steps
1. Press the TRANSMIT VOLUME flexible button (FLASH 40, Page B,
2. Enter a valid number (0-9) for the desired volume level.
3. When the desired level is selected, press HOLD to complete the entry.
Description
Up to ten volume levels are available for each CO Line in the system. By
default, all CO lines are programmed for level 5 (0 dB).
[0] = Disabled
[1] = Enabled
and the display updates.
Button #4). The following message displays:
TR AN S MIT V OLU ME
0 D B
[0]
-15 dB
[1]
-12 dB
[2]
-9 dB
[3]
-6 dB
[4]
-3 dB
A confirmation tone is heard and the display updates.
Do NOT adjust this option without consulting Technical Support first.
The default settings were set to apply to most applications. Have the dB
readings on all CO lines available when calling Technical Support.
[5]
0 dB
[6]
+3 dB
[7]
+6 dB
[8]
+7.5 dB
[9]
+9.0 dB
Page B Introduction
0- 9
Advertisement
Table of Contents
