2-66
On-Board Relay Programming
Programming Steps
1. Press FLASH and dial [14]. Button #1 is lit to indicate Relay #1 is
2. Press the button that corresponds to the desired relay. That button
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The
relays on the MISU that can be programmed to perform certain functions.
These functions are loud bell, external page control, RAN Start, PFTU
control, and CO Line control.
RELAY
1
1
RELAY
5
5
selected. The following message displays:
R ELAY X TY P E
Y Y Y Y Y Y Y Y Y Y Y Y
X = 1-6
YYYYYYYYYYYY = Ext Page Zone 1-2, LBC Sta XXX, Ran Start X, CO Control XX, PFTU
lights. Enter one of the following sequences on the keypad:
[1] + [1 or 2] First two External Page Zones
[2] +[1 through 8] = RAN Start (RAN Announcement Tables 1-8)
[3]= PFTU Control
[4]+ STA # = Loud Bell
[5] + CO # = CO Line Control
[0]= Disables Relay
display updates.
Each time the user presses a relay button, the LCD updates with the
relay number and the function assigned to it.
Triad 1/2
has four (4) relays on the MISU and the
RELAY
2
Q
2
RELAY
6
T
6
RELAY
3
W
3
Y
7
On-Board Relay Programming
Triad 3
has six (6)
RELAY
4
E
U
4
R
8
I