Table of Contents
Advertisement
10-14
2. Enter the table information as follows:
3. Press the HOLD button to save the entry. A confirmation tone is heard
Adding and Deleting Numbers in the Same Table
1. Enter the different Insertion/Deletion tables in step 1.
2. Enter as separate entries using the same table number.
3. In the Insert Tables for LCR Programming, press the TRANS button for
Deleting a Table
Description
Digits can be either added or deleted when dialing a number. For
instance, if a user dials a long distance call that should be placed on a
foreign exchange (FX) line, the digit [1] and the three-digit area code
(NPA) dialed by the user must be deleted before the call can be placed on
that FX line. An Insert/Delete table can be programmed to do this.
T T = Insert/Delete Table Number 00–19
X = [0] Pre-Delete numbers (first digits dialed in the number),
-or-
[1] Pre-Insert numbers (insert digits in front of number dialed,
-or-
[2] Post-Insert numbers (insert digits behind number dialed).
DDD = Digits (up to 16-digits may be deleted from the beginning
of the number dialed and up to 40 digits can be inserted
(20 pre and 20 post).
and the display updates.
a pause.
The [ ] and [#] digits are allowed as valid digits for inserting
digits dialed over the network.
The [ ] and [#] are valid entries for adding digits in both the pre
(in front of) or post (behind the number) tables.
The [ ] and [#] cannot be used as delete characters in the Delete
tables.
Enter a valid table number and press the HOLD button.
LCR Operation
Advertisement
Table of Contents
