T-1 Alarm Programming
Data Errors Alarm
Programming Steps
1. Press the DATA ERRORS flexible button (FLASH 47, Button #7).
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press HOLD button to save entry. A confirmation tone is heard and
4. Continue to program the Data Error Alarm parameters using steps
Description
By default, Data Errors Alarm is enabled for all T-1 Trunks.
Clear Alarm
Programming Steps
1. Press the CLEAR ALARM flexible button (FLASH 47, Button #12).
2. Press the HOLD button to clear the alarm. A confirmation tone is
Description
The Clear Alarm option allows the alarm condition reported to the
Attendant Display to be cleared.
Button #7 and Button #11 LEDs are lit steady. The following message
displays:
D ATA ER R OR S
EN AB LE D
[0] = Disabled
[1] = Enabled
the display updates.
provided in this section for Clearing the alarm, Minor alarm, Major
alarm, Time Period and Attendant display.
Button #12 LED is lit steady. The following message displays:
D ATA E RR OR S
CLEA R A LAR M PR ES S HOL D
heard.
0- 1
3-73