Table of Contents
Advertisement
Page C Introduction
Seize Timer
Programming Steps
1. Press the SEIZE TIMER Button (FLASH 40, Page C, Button #7) in the
2. Enter a valid number on the dial pad which corresponds to 000–255
3. Press the HOLD button to save the entry. A confirmation tone heard
Description
The Seize Timer option allows the user to adjust the Seize Timer on a per
CO Line basis. The Seize Timer is used on ground start type trunks. This
Seize Timer is a lead filter timer. The CO must provide ground at the tip
lead for longer than this timer in order for the system to recognize it. By
default, the Seize Timer is set for 0.1 seconds.
Preset Forward Timer
Programming Steps
1. Press the PRESET FWD TIMER flexible button (FLASH 40, Page C,
2. Enter valid number on dial pad which corresponds to 00–99 seconds.
3. Press HOLD to save the entry. A confirmation tone is heard and the
flexible button field. The following message displays:
SEI ZE T IMER
01 0
(100 ms to 2.55 seconds).
and the display updates.
Button #8). The following message displays:
P RE SET FW D T IMER
10
display updates.
0 00- 25 5
0 0-9 9
3-35
Advertisement
Table of Contents
