Ring Tone (Per Co Line); Ringing Tones - Vodavi STARPLUS Triad 1 System Programming Manual

Hide thumbs Also See for STARPLUS Triad 1:

Table of Contents

Ring Tone (per CO Line)

Programming Steps

1. Press the RING TONE flexible button (FLASH 40, Page B, Button #9).

2. Enter a valid number on the dial pad to change this feature.

Tone Duration = 50 ms/50 ms

3. Press HOLD to save the entry. A confirmation tone is heard and the

The ring tone signal used to notify stations of an incoming call can be

changed in administrative programming to provide distinctive ringing

on a per CO line basis. A distinctive ring tone can be programmed for

each CO line that rings each station. The system provides 36 different

ring patterns that can be selected for each CO line in the system.

By default, Ring Tone is set for 00 (697/770).

The following message displays:

Table 3-8: Ringing Tones

display updates.

Distinctive CO Ring Tone overrides station distinctive ringing.

Page B Introduction

Starplus triad 3 Starplus triad 2