Table of Contents
Advertisement
LCR Operation
6-Digit Office Code Table
Programming Steps
1. Press the 6-DIGIT TABLE flexible button (FLASH 75, Button #2). The
2. Press the HOLD button to save the entry. A confirmation tone is heard
3. Enter additional office codes to be programmed into the same Area
4. Press a flexible button to program a different table.
Deleting All Entries in an Area Code/Route Table
Description
The 6-Digit Office Code Table determines a route for one or a group of
individual office codes within an area code. Certain office codes within an
area code can be given unique or special routing. If the office code dialed
is not found in the 6-digit Office Code Table, the call is then routed
according to the route list table as was entered in the 3-digit table.
The system allows twenty 6-digit Area/Office code tables that may be
used to route specific office codes within an area code. Each table routes
calls for a common area code to a specified route. All entries made to a
table route those office codes to the specified route list table. An area
code may be entered into more than one 6-digit table with different
routes specified.
following message displays:
6 D IG IT ROU T ING TA B LE
EN TE R
A AA
= [0] to remove codes, [1] to add codes
AAA = Area Code
RR = Route Number 00-15
NNN = Office Code
and the display updates.
Code/Route Table, pressing HOLD after each office code entry.
Enter [0 AAA RR ###].
R R N NN
HO LD
10-9
Advertisement
Table of Contents
