Table of Contents
Advertisement
Page A Introduction
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Co Line Identification Display feature allows the entry of a name for
each line (trunk) connected to the system. Once entered into the
database, LCD phones, including the Attendant stations, receive the
programmed line name in place of the default LINE XXX message. This
applies to all line call processing conditions where the current LINE XXX
message displays. SMDR continues to print out the line number in place
of the programmed name. If the line name was not programmed, the
current LINE XXX display is the default. A programmable data field is
available for each line in the system. Line names may be assigned using
the range programming.
A message similar to the following display is used for all CO Line displays
when a name is programmed for a CO Line.
Table 3-5: Dial Pad Keys
display updates.
LIN E R ING IN G
n n n nn n n n n n n n
Entries can be made using a keyboard by following the same outlined
procedures using
Other Codes
1 = 1#
8 = 8#
2 = 2#
9 = 9#
3 = 3#
0 = 0#
4 = 4#
Space = 11
5 = 5#
: = 12
6 = 6#
- = 13
7 = 7#
' = 14
H H :M M am
Figure 1-1
.
= 01
* = *#
, = 02
( = #1
? = 03
) = #2
/ = 04
+ = #3
! = *1
= = #4
$ = *2
# = ##
& = *4
. = 24
3-15
Advertisement
Table of Contents
