System Hold Recall Timer - Vodavi STARPLUS Triad 1 System Programming Manual

2-4
Program
Code Button
FLASH 01

System Hold Recall Timer

Programming Steps
1. Press the SYSTEM HOLD RECALL TIMER flex button (FLASH 01,
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Table 2-1: System Timer Defaults
Flex
1 System Hold Recall
2 Exclusive Hold Recall
3 Attendant Recall Timer
4 Transfer Recall Timer
5 Preset Forward Timer
6 Call Forward No/Answer
7 Pause Timer
8 Call Park Recall Timer
9 Conference/DISA Timer
10 Paging Timeout Timer
11 CO Ring Detect Timer
12 SLT DTMF Receiver Timer
13 MSG Wait Reminder Tone
14 SLT Hook Flash Timer
15 SLT Hook Flash Debounce
16 SMDR Call Qualification Timer
17 Auto Call Back Timer
18 Reminder Ring Timer
20 Inter-Digit Timeout
Button #1). The following message displays:
SY ST EM HOL D R ECA LL
06 0
000-300 seconds.
display updates.
Feature
0 00- 30 0
System Timers
Default
(after initialization)
060 seconds
180 seconds
01 minute
045 seconds
10 seconds
015 seconds
2 seconds
180 seconds
10 minutes
15 seconds
300 ms
020 seconds
000 minutes
10 (1 second)
030=.3 seconds)
30 seconds
03 seconds (enabled)
00 seconds (disabled)
5 seconds