Call Back Button; Line Queue Button - Vodavi STARPLUS Triad 1 System Programming Manual

2-56

Call Back Button

Programming Steps
1. Press the CALL BACK BTN flex button (FLASH 07, Button #16). The
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Call Back Button flash rate is the rate at which the Call Back button
flashes when a station at which you left a call back request becomes
available. This flash rate can be programmed to 29 different options
identified in the flash rate table. This enables the programmer to
customize the key system configuration to desired flash rates. By default,
Call Back Button flash rate is set for a Red 120 ipm Flash (10).

Line Queue Button

Programming Steps
1. Press the LINE QUEUE BTN flex button (FLASH 07, Button #17). The
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
following message displays:
CAL L B ACK BT N
R ED 1 20 IPM FLA SH
the 29 available options. (Refer to
display updates.
following message displays:
LIN E QU EU E BT N
R ED 4 80 IPM FLU T TER
the 29 available options. (Refer to
display updates.
Programmable Flash Rates
0 0-2 8
Table 2-6: Flash Rates.)
0 0-2 8
Table 2-6: Flash Rates.)