Flexible Co Port Assignment - Vodavi STARPLUS Triad 1 System Programming Manual

3-42

Flexible CO Port Assignment

Programming Steps
If the CO Line numbers need to be relocated to different ports, press
FLASH and dial [42]. The following message displays:
Buttons 1 through 18 indicate Ports 1 through 144. When the relocation
program is initially entered, Button #1 is lit to indicate that the user is
programming the CO Line numbers.
Changing the CO Line Number Assigned to any Port
1. Dial the position number on the display (01 through 08).
2. Then dial the CO Line number desired and press HOLD.
CO 0 01
0 06 00 7 00 8
Example 1 -- If [01003] is dialed and the HOLD button is pressed, the
CO line number of the first entry on the display changes to [003].
Since [003] was shown as the third entry on the display, that entry is
blank (###).
CO 0 03
0 06 00 7 00 8
Example 2 -- If Button #3 (CO Ports 17-24) is pressed, the following
display appears:
CO 0 17
0 22 02 3 02 4
Example 3 -- If [03020] is dialed, the CO line number of the third entry
on the display changes to [020]. Since [020] was shown as the fourth
entry on the display, that entry is blank (###).
CO 0 17
0 22 02 3 02 4
When all the CO Li n e numbers desired have been programmed, the system
resets to update the data. This is done so that the programming of
CO Lines can be done while the system is in use.
0 02 00 3 0 04
0 02 ## # 00 4 0 05
0 18 01 9 0 20
0 18 02 0 # ## 0 21
Miscellaneous CO Parameters
00 5
02 1