Table of Contents
Advertisement
ICLID Features
Incoming Number/Name for SMDR Records
When the Incoming Number/Name feature is implemented, the system
operates normally in the absence of ICLID information or the failure of
the ICLID equipment. If the information is present at the time that an
SMDR record is generated for a call, it alters the content and format of the
SMDR output record.
Unanswered calls are recorded in the SMDR record for incoming calls
with a U indicator to provide caller identification for statistical and
call-back purposes.
ICLID Features
Programming Steps
1. Press FLASH and dial [56]. The following message displays:
2. To program ICLID features, use the flexible button(s) as defined in the
3. After all entries are made, press HOLD to accept the data.
If the calling number is available, the number is output in the SMDR
record in the same location as the dialed number is located in the
outgoing call record.
If the calling name is present, an additional line is output in the SMDR
identifying the name. This record immediately follows the normal
SMDR record. The normal SMDR record includes an indicator that
states the following record with name identification is present.
ICLID NA ME B AU D P OR T
N O
YE S
9 60 0
following procedures.
Button # 1 = Disable/Enable
Button # 2 = Name In Display
Button # 3 = Baud Rate Display
Button # 4 = Port Assignment
1
5-5
Advertisement
Table of Contents
