6-22
Description
The PC/ACD Interface Trace provides a series of events trace output
which is compatible with the Discovery ACD Reporting package. By
default, the PC/ACD Event Trace is disabled (NO).
Trace Port Assignment
Programming Steps
1. Press TRACE PORT ASSIGNMENT flexible button (FLASH 63, Button
2. Enter a valid number for the PC/ACD Event Trace Port number:
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
By default, the trace port assignment is set to 1.
#2) to determine which port to use for PC/ACD Interface Trace.
[1] = Port #1 (MPB On-Board RS-232-C)
[2] = Port #2 (On-Board Modem)
[3] = Port #3 Serial Interface Unit (SIU2)
[4] = Port #4 Serial Interface Unit (SIU2)
The LCD displays the current baud rate based on which Port number
is assigned to the ACD SMDR Port number (default is Port #1).
ACD _ EV T _ TR ACE I/ O B AU D
N O
display updates.
1
96 00
PC / ACD Interface Trace