Table of Contents
Advertisement
4-16
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Administration Access feature allows a station to access Database
Administration. Each station can be enabled/disabled for system
programming. By default, feature is disabled.
Page B Introduction
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
1. Press FLASH and dial [50]. Flexible button #24 (New Range) is lit and
2. Enter the range of station numbers to be programmed. If only one
3. Press HOLD to save the entry. A confirmation tone is heard and the
[0] = Disable
[1] = Enable
Station 100 always has programming access regardless of this setting.
the following message displays:
STAT ION AT TR IB UT ES
SEL ECT A STATION RA N GE
station is being programmed, enter that number twice, e.g., [100100].
If HOLD is pressed without entering a station range, all stations
(100-171
display updates. Flexible button #19 (Page A) is lit.
or
100-351
) are selected.
Page B Introduction
Advertisement
Table of Contents
