2-72
Database Admin Password
Programming Steps
1. Press the ADMIN PASSWORD flex button (FLASH 20, Button #2). The
2. Enter a valid number on the dial pad that corresponds with
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The password used to enter customer database programming can be
customized by the programmer. This lets the system administrator block
unauthorized personnel from entering database admin.
Station Message Detail Recording (SMDR)
Programming Steps
1. Press FLASH and dial [21]. The following message displays:
2. To program SMDR features, use the flexible button(s) as defined in
3. The ENABLE/DISABLE, TYPE, and PRINT features toggle on and off
following message displays:
AD MIN PASS WOR D
32 26
0000-9999.
display updates.
Care should be taken when changing the programming password so
authorized personnel are not locked out, which could prevent or delay
them from making necessary programming changes.
SD R T PE P N T B AUD P OR T
N O
LD
8 0
the following procedures.
each time the button is pressed. The display updates with each
toggle.
Station Message Detail Recording (SMDR)
9 60 0
1