5-24
Dump Memory Data
Three options allow the memory structure to be dumped for viewing.
The three options are entered as follows:
The data obtained from these commands is in hexadecimal format and is
used primarily for manufacturer- level support.
Event Trace Mode
The t command enables and disables the
mode. While the trace mode is enabled events for the trace desired is
displayed on the monitor, printer or PC connected to the
Systems in an event record. To view the current status of the trace mode
type [t]<return> at the mon> prompt, the following displays:
c [c] – Dump CO Line memory structure
s [s] – Dump Station memory structure
d [a][a]– Dump a memory address structure
Press the Esc key to abort the Data Dump and returns to the mon>
prompt.
Figure 5-6: Trace Mode Status
Remote System Monitor
Triad 1/2/3
Systems' Trace
Triad 1/2/3