Table of Contents
Advertisement
6
ACD Supervisor Features
Group Member Status
This feature provides a means for an ACD supervisor/Agent
to view the status of the 16 ACD groups in the system. This
display will tell the supervisor which stations are logged
into the group, if the station logged in is available/
unavailable, out of service, in DND, or busy on a call. The
display could be used to determine why there are so many
queued calls in a specific group.
Any station (Supervisor/Agent) logged into the ACD group
can bring up the Group Member display by:
1. Dial the Group Member Status code, [573], or press the
STATUS Flexible button (if pre-programmed).
A Flexible button must be programmed to use some of
the following features. Refer to
Buttons
.
AC D 5XX 110A 111A 112A
11 3 O 1 14 U 115D 116B 117N
(N) = Not equipped
(D) = Do Not Disturb
(O) = Out of Service
(U) = Unavailable
(B) = Busy on a call
(A) = Available
Figure 5: ACD Group Member Display
ACD Supervisor Features
Programming Flexible
Advertisement
Table of Contents
