2-58
Features and Operation
Off-Hook Preference
Description
Telephones, key and SLT, may be programmed to have their personal Centrex line accessed
automatically just by lifting the handset or pressing the ON/OFF button (Speaker Button on
SLTs). Internal features to the STSe are still made available to digital telephones by accessing
intercom before going off-hook. Refer to
page
2-263. An SLT can obtain ICM dial tone by pressing the FLASH button and dialing their
extension number.
Private Line Appearance
Description
The STSe allows for private line assignment on an unlimited basis. Each station may have sole
access to a particular outside line if desired and may also be assigned to receive incoming
ringing on that line. Refer to
Station" on page
Programming , #, and Hook-Flashes into Speed Dial
Description
Many Centrex codes utilize a hook-flash followed by, in many cases, the digit [ ] and or [#].
The STSe allows programming of these codes as a part of system or station speed dial
sequences. Refer to
Centrex/PBX Flash
Description
Provides telephone users with the ability to terminate an outside call or transfer a call behind
a PBX or Centrex and restore dial tone without hanging up the handset. A FLASH button is
located on each digital telephone.
Operation
When connected to an outside line:
Press FLASH to disconnect outside line and reseize outside line dial tone.
SINGLE LINE TELEPHONE
Press the FLASH button, then dial [660].
STARPLUS STSe - Programming & Operations Manual
"CO Line Group Programming" on page
2-73, and
"Flexible Button Function Assignment" on page
"Speed Dial" on page
"Ring Down / Hot Line / Off-Hook Preference" on
2-275.
Centrex/PBX
2-74,
"Line Group Access -
2-163.
August 2005