Account Codes
To delete logged 911 Alert messages:
Attendant
An
messages on a system-wide basis.
1.
Press the 911 ALERT flexible button to display the 911 call
information for deletion.
2.
Press FLASH to delete that message.
Account Codes
You can enter an account code that contains up to 12 digits. If fewer
than 12 digits are entered, you will need to press the [ ] key to
return to the call.
Using Account Codes
Prior to placing, or during, an outside line call:
1.
Press the preprogrammed ACCOUNT CODE button (627).
2.
Dial the account code. (The other party does not hear the
digits being dialed).
» If account codes are forced, the account code must be
entered prior to dialing the outside number.
3.
Dial [9] or CO Access code. A dial tone will sound.
4.
Dial the desired number.
Verified Account Codes
Prior to placing an outside line call:
1.
Press the preprogrammed ACCOUNT CODE button (627).
2.
Dial the account code.
must use the following steps to delete the
Dialing 911 from any station overrides
previously enabled features such as Do Not
Disturb.
3