Table of Contents
Advertisement
CAB FORWARD/ENGINE RUNNING/HEADER ENGAGED
(Scroll Through Display with CDM Switch or GSL Switch)
DISPLAY (Lower or Upper Line)
#####.# ENGINE HRS
#####.# HEADER HRS
##.# ACRES/HOUR
##.# HECTARES/HOUR
###.# SUB ACRES
###.# SUB HECTARES
###### TOTAL ACRES
###### TOTAL HECT
#### DISC RPM
##.## REEL SENSOR
##.# HEADER HEIGHT
##.# HEADER SENSOR
##.# HEADER ANGLE
##.# HEADER SENSOR
##.# L FLOAT R ##.#
LOAD|■■■■■■■■■■■■
##.# VOLTS
SCROLL
(Lower Line)
DISC SPD OVERLOAD
Form # 169017
OPERATOR'S STATION
ROTARY HEADER
(If Metric)
(If Metric)
(If Metric)
(If Sensor Disabled)
(If Sensor Disabled)
(If Sensor Disabled)
(Lower Line)
36
DESCRIPTION
Total Engine Operating Time.
Total Header Operating Time.
Actual Cutting Rate In Acres (Hectares)/Hour.
Area Cut Since Last Reset.
Total Area Cut By Machine.
Disc Rotational Speed.
Distance Setting (00.0-10.0) Between Cutterbar &
Ground.
Angle Setting (00.0-10.0) Header Relative To
Ground.
Left And Right Float Setting (0.0-9.9).
Bar Graph Representing Hydraulic Operating
Pressure. If sensor disabled, LOAD does not display.
Engine Electrical System Operating Voltage.
Displays Sub-Menu After 2-3 Seconds. Press
SELECT to cancel.
(Scroll Through Sub-Menu Display with CDM Switch)
SCROLL SUB-MENU (Lower Line Only)
#### DISC RPM
##.# HEADER HEIGHT
LOAD|■■■■■■■■■■■■
Disc Speed Is Less Than Programmed Set-Point.
Issue – June 2008
Advertisement
Table of Contents
