Table of Contents
Advertisement
7.9.8.2
Changing Lubricant
Change gearbox lubricant after the first 50 hours
and then at 500 hours as follows:
The engine should be warm prior to
changing the oil.
a. Stop the engine and remove the key.
b. Place a drain pan of about 1 U.S. gallon (4 litres)
under the gearbox.
c. Remove drain plug (C) and allow the oil to
completely finish draining.
d. Install the drain plug (C) and remove the check
plug (A).
Form 169017
MAINTENANCE/SERVICE – M150 ENGINE
NOTE
C
A
e. Unscrew breather cap (B) and add lubricant.
The gearbox will require 2.2 U.S. quarts (2.1
litres).
runs out of hole (A).
Service
Transmission Lubricant. SAEJ2360 preferred.
f.
Operate the engine at low idle and check for
leaks at the check plug and drain plug.
139
B
Add sufficient lubricant until it slightly
Use SAE 75W-90 API
Class
GL-5,
Fully
Issue – June 2008
Synthetic
Advertisement
Table of Contents
