MacDon M150 2008 Operator's Manual page 73

k. Raise lift arms.
l. Move float pins (G) back into storage hole at (K).
m. Attach header to tractor. Refer to Section 6.5.1
Header Attachment – D Series.
n. Convert header into field position. See Header
Operator's Manual for procedure.
IMPORTANT
Temporary lift
removed when operating the header
o. Disengage header lift cylinder locks.
p. Lower header to the ground.
q. Remove temporary lift arm pins (J) from the rear
of the lift arm and place into storage holes in the
weight box.
6.3.8.3 Towing The MacDon MT8 Transporter
The M Series Windrower Tractors can tow the
MacDon MT8 Header Transporters in one-axle,
two-axle, and three-axle configurations. Refer to
the MT8 Transporter
#169365.
Form 169017
WINDROWER TRACTOR OPERATION
K
G
arm pins MUST be
Operator's Manual
71
Issue – June 2008