Flood Lights - Rear - MacDon M150 2008 Operator's Manual

IMPORTANT
Do not touch the glass of the halogen bulb
as the oils or other chemicals from your
skin will cause the bulb to fail prematurely.
G
D
g. Match slots on new bulb (E) with lugs (G) in
optical unit and insert bulb into unit.
h. Secure bulb with wire retainer (D).
i. Push wire into connector (F).
B
j. Position light into light receptacle, ensuring top
is up, and secure with bezel (C) and screws (B).
Form # 169017
MAINTENANCE/SERVICE
F
E
C
7.12.5

Flood Lights - Rear

7.12.5.1 Adjustment
The rear floodlights are best adjusted with the
machine in the field or the equivalent to suit
operator preference.
a. Shutdown engine and remove the key. Turn on
lights.
b. Loosen bolts (A) and (B).
c. Position light to desired position.
d. Tighten bolts (A) and (B).
7.12.5.2 Bulb Replacement
a. Shutdown engine and remove the key. Turn off
the lights.
b. Remove the two screws (H) and remove light
bezel (J).
178
A
B
J
H
(continued next page)
Issue – June 2008