Cummins Engine (M150); General Engine Inspection; Manually Turning Engine - MacDon M150 2008 Operator's Manual

Self-propelled windrower
Table of Contents

Advertisement

7.9 CUMMINS ENGINE (M150)

CAUTION
• Never
operate
building. Proper ventilation is required to
avoid exhaust gas hazards.
• Keep the engine clean. Straw and chaff
on a hot engine are a fire hazard.
• Never use gasoline, naphtha or any other
volatile material for cleaning purposes.
These
materials
flammable.
7.9.1

General Engine Inspection

Have the overhead valve lash checked and
adjusted every 5000 hours or 4 years by your
Windrower dealer.
A general engine inspection, including the fuel
injection
pump
and
recommended every 2000 hours.
dealer.
7.9.2

Manually Turning Engine

To manually turn the engine with the flywheel,
an access hole is provided on the left cab-
forward side for a barring tool that is available
from Cummins.
Manually turn engine as follows:
IMPORTANT
Ensure nothing falls into gearbox oil
reservoir.
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Remove key from ignition.
Form 169017
MAINTENANCE/SERVICE – M150 ENGINE
engine
in
a
closed
are
toxic
and/or
nozzle
inspection,
See your
b. Move platform on right cab-forward side of
machine to open position to allow access to the
battery.
A
is
c. Remove red plastic covers (A) from positive
cable clamps. Loosen the clamps and remove
cable from batteries.
d. Open engine compartment hood to lowest
position.
123
(continued next page)
Issue – June 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

M200 2008M150M200

Table of Contents